本文列出了旋转流变仪在各工业领域的应用文章摘要及关键词.
您可以访问并注册www.malvern.com.cn,在教育菜单下的应用库中查看及免费下载列表中所有应用文章的全文及更多技术资料! 马尔文公司将陆续发布各个领域的应用文摘供您参考.
工业领域： 1 高分子材料
2 涂料、油漆行业
3 食品行业
4 石化行业
5 个人护理品、化妆品
6 分散体系，悬浮液、乳液
1.1 热塑性高分子材料熔体流变学
1.1 A rheological viewpoint of thermoplastic melts
Polymer melt rheology is a complex subject that requires careful experiment design in order to obtain the information needed to meet an investigator’s requirements.
1.2 Bohlin 高分子材料行业应用文章集
Compilation of Bohlin application notes for the Plastics and polymers industry
2.1 Bohlin 粘合剂和涂料行业应用文章集
Compilation of Bohlin application notes for the Adhesives and sealants industry
2.2 Bohlin 涂料行业应用文章集
Compilation of Bohlin application notes for the Coating industry
2.3 使用Malvern Spraytec表征涂料喷涂过程
2.3 Coating nozzel characterization using the Malvern Spraytec
Coating nozzel characterization using the Malvern Spraytec
2.4 流变学方法评价涂料流挂和泵送性能
The yield stress can be used to calculate whether a sample is likely to sag on application, as well as whether it will be difficult to start pumping or stirring. Good rheological product design will dramatically enhance processing and end use performance.
2.5 表征油漆去除刷印和增强抗流挂性能的流变学方法
The flow profile of coatings indicates their suitability for end use, with respect to whether they will flow easily through pipes and the spray nozzle.
2.6 流变学方法预测油漆性能
This note describes how rheological experiments can be used to give information on the performance characteristics of the paints.
2.7 使用流体活塞头表征液体涂料高剪切流变行为
Spray paints and other low viscosity coatings can be characterised at extremely high shear rates in the Rosand capillary rheometer, which enables their viscosities to be measured at printing and spraying shear rates.
2.8 流变学方法表征泵送和喷雾过程
The pumping and spraying characteristics of materials will be directly related to the viscosity at a high shear rate.
3.1 Bohlin 食品行业应用文章集
Compilation of Bohlin application notes for the Food industry
3.2 使用Bohlin旋转流变仪表征冰淇淋的流变性能
The rheology of ice cream can be critical for good customer perception and acceptance of the product. The ease of scooping the product when it is removed from the freezer, the mouth feel and the creaminess are three aspects discussed in this application note.
3.3 流变学方法表征黄油的涂抹性能和脂肪组成
The spreadability of butter and margarine products can be easily assessed by measurement of its complex viscosity at different temperatures.
3.4 流变学方法表征食用汤悬浮能力
The yield stress can be used to calculate whether a sample is likely to settle in-situ, or whether it will be difficult to start pumping or stirring. Good rheological product design will dramatically enhance processing and end use.
3.5 流变学方法表征黄油的铺展性
The 'end use' rheological properties of margarine spreads are important both with regard to 'usability', i.e. how easily they spread and aesthetically, whether there is an unacceptably visible phase separation.
3.6 食品工业流变学 - 第二版作者：James F. Steffe
Full edition provided with kind permission of James F. Steffe
3.7 蛋黄酱流变学表征
The rheological properties of materials such as mayonnaise give an indication of this reproducibility and can be correlated with, for example, storage stability, ease of pumping and sensory perception (i.e. mouthfeel).
3.8 流变学表征冰激淋
Published in Innovations in Food Technology August 2005. Rheometry can be used to accurately quantify the ease of handling of cold ice cream, the mouth feel and the creaminess – factors that are very important to consumer perception. The rheometer is an ideal tool for the analysis of small batches...
3.9 使用流变仪研究食品流变行为
Many foodstuffs are concentrated dispersions of solid particles in a liquid medium (e.g. tomato ketchup), or liquid droplets in a liquid medium (e.g. mayonnaise). The manufacture of these products has to be very reproducible in order to satisfy customer needs.
3.10 流变学方法表征食品的加工行为
Article published in "Food", winter 2005
3.11 流变学方法表征糖果巧克力的“站立”性
The Bohlin rheometer can be used to assess the ‘stand-up’ characteristics of foods very simply, making it an ideal tool to assist formulation without the need for extensive production trials.
3.12 流变学方法表征黄油“涂抹性”和脂肪成分
The spreadability of butter and margarine products can be easily assessed by measurement of its complex viscosity at different temperatures.
4.1 Bohlin 石化行业应用文章集
Compilation of Bohlin application notes for the Petrochemical industry
4.2 流变学方法研究润滑油的温度转变性能
The melting point and glass transition temperatures can be accurately measured for any grease or lubricant compound using the Bohlin CVO where the transition occurs between -150ºC and 550ºC.
5.1 评价产品运输过程中的稳定性
Many skin care products are complex fluids which have very delicate structures. As a result these structures may be broken down due to prolonged exposure to stresses encountered during transportation. This can be a major issue since theses products must be functional and visually acceptable when...
5.2 使用蠕变测试方法评价个人护理品悬浮稳定性
5.2 Assessing suspension stability in personal wash products using creep testing
Many personal wash products may require the inclusion of particulate abrasives, or insoluble solids/liquids to give opacity, visual cues, moisturizing benefits or antibacterial properties to the product.
5.3 基于表面活性剂的洗漱用品悬浮稳定性测试
5.3 Assessing suspension stability in surfactant based wash products
Many personal wash products may require the inclusion of particulate abrasives, or insoluble solids/liquids to give opacity, moisturizing benefits, visual cues or antibacterial properties to the product.
5.4 使用动态流变测试表征“回缩”性能
Paint can be re-formulated and evaluated in the laboratory by addition of suitable modifiers, to provide an elastically dominated end product that will not cause filling problems.
5.5 使用Malvern Spraytec表征家用喷剂
The particle size produced by aerosol spray can systems is an important factor in controlling product efficacy and minimizing any user exposure risks.
5.6 流变学方法评价产品在瓶子、管道和喷嘴中的输送性能
Many skin care products are packaged in tubes or bottles where product application involves pumping the product through a nozzle or orifice.
5.7 使用循环温度扫描评价产品的热稳定性
The personal care sector includes a wide range of skin care product types with different rheological properties, including face creams, body lotions and surfactant based wash products to name a few.
5.8 评价产品的剪切增稠（胀塑性）行为
The personal care sector encompasses a wide range of skin care product types with different rheological properties, including face creams, body lotions and surfactant based wash products to name a few.
5.9 复杂流体运输稳定性
The Complex Fluids industry sector uses a variety of complex fluids to show the types of processing issues and analytical testing requirements that many industries will be familiar with.
6.1 通过颗粒特性（粒度、Zeta电位和粒形）控制分散体系流变行为的10种方法
6.1 10 ways to...Control rheology by changing particle properties (Size, Zeta potential and Shape)
Many materials in use today are disperse systems where one substance (often particulate) is dispersed in another phase. These material types include adhesives, agrochemicals, cement, ceramics, colloids, cosmetics and personal care formulations, food and drink, mining and mineral slurries, paints,...
6.2 通过优化流变特性增加分散体系/胶体/乳液稳定性的10种方法
6.2 10 ways to...Optimize rheology to increase dispersion / colloidal / emulsion stability
The following ten points highlight general methods of designing and interpreting rheological tests to optimize sample stability.
6.3 一种快速分析分散体系沉降问题的方法
A wide variety of products are liquid dispersions. This is because aqueous based dispersions have advantages, for example lower viscosity compared to solutions of comparable solute concentration and water is more acceptable than organic solvents.
6.4 分散体系流变测量壁面滑移问题
Measurements at low shear rates or shear stresses can reveal much information on both the application behaviour and the microstructure of materials.
6.5 分散体系流变学
A rapid method to predict particle sedimentation in liquid dispersions
6.6 流变学方法预测沉降稳定性
A relatively quick amplitude sweep experiment can probe the microstructure of the sample indicating the dispersion stability of a suspension (solid in liquid).
6.7 应力扫描方法预测乳液储存稳定性
Assessing the long term stability of an emulsion type product can be both a tedious and time consuming process; however, it is essential to ensure the product meets quality standards.
6.8 样品加载历史-Coplex _Fluids_0011-1
The complex fluids industry sector uses a variety of complex fluids to show the types of processing issues and analytical testing requirements that many industries will be familiar with.
请访问并注册
http://www.malvern.com.cn/malvern/kbase.nsf/search?readform 免费下载以上列表应用文章的全文.